Before you design your next custom t-shirt print location is must or buy a shirt from any Custom Apparel business in the United States, it’s critical to understand the criteria. The great majority of prints are in standard positions for a reason: they are time tested. There are guidelines that all professional printers observe, whether they’re doing screen printing, digital printing, or even printed vinyl. Understanding the rules allows you to get ahead of the game. You could even wish to experiment with a different place.
CUSTOM APPAREL PRINT:
To guide you in identifying where to print your logo or design, this article discusses the standard print locations. Also includes some more information about each one.
- Print location – The name of this category refers to the location of the print on the garment. Within the print site, the placement and print area may differ. It can be used to relate to size and position in a hazy way.
- Print placement refers to the precise location where the print will be placed. Depending on the size of the clothing, personal choice, and other considerations, this can vary by a few inches or more.
- Print area — This term is sometimes swapped with print location, however it refers to the surface area of the cloth that the ink will cover (important when it comes to pockets, seams, buttons, etc.)
- Print size – The actual measurement of the artwork to be printed is known as the print size. This will determine the print area, as well as the print placement. We strongly advise that you determine your exact print size.
- Standard size — When consumers do not specify a specific size, the standard size at each print location is considered. Depending on the design and clothing, this may need to be modified slightly.
- Oversize – Anything that is larger than the usual. This size sits between standard and maximum, but it’s not a common suggestion.
- Maximum size – As the name implies, this is the utmost print size available for a specific order. It varies based on the item and print method, but it’s simple to ask.
- Anchor point – Rather than the midway, this is the point on the design that should be centered. This might help you spot patterns that aren’t naturally symmetrical.
Print locations with its placement and standard size:
The top 8 print places, as well as the standard size and placement for each, are as follows:
1. Print location Chest, left:
When you’re offering shirts for employees, event staff, or anything else, this is the go-to area for your logo. The size is appropriate; it’s usually 3″ to 4″ wide and 3′′ down from the collar. The placement may be adjusted to match the size of the shirt, ensuring that it always looks good. On the left hand side. Also, keep in mind that people won’t be able to view intricate artwork. So keep it straightforward.
This is not to be confused with Right Chest, but it is frequently confused with it. To be clear, when you’re wearing it, the left refers to your left side. If you like, the right chest is OK, but it is not standard.
Pro tip: For a classic look, pair it with a Full Back print: a simple company logo on the Left Chest and more detailed, colorful, or ornate artwork on the back. The Left Chest is back in style, allowing you to look both professional and fashionable.
2. Center Chest:
Another classic spot, and it’s right where you’d expect it to be: right in the middle, on the chest.
Even if someone is wearing a jacket, hoodie, or open button-down shirt, this is a medium sized pattern, so it is nearly always fully visible.
The width of the range is anything from 6″ to 10″, so 8″ would be normal, and the placement is roughly 4′′ below the collar. Make sure to explain your requirements.
The size range of the garments may also differ; if it skews smaller, especially in child sizes, go with Center Chest. If it’s on the larger side, say 3XL, a Full Front might be the way to go.
3. Full Front:
The most common print location. When people say “front” they usually mean Full Front. The standard size for Full Front is 12”w x 14”h, and placement is around 3″ down from the collar. There are many Custom Apparel store in USA to shop from.
4. Front Oversize:
If you thought Full Front was enormous, wait till you see Oversize Front. It’s over the size that should probably be printed on a T-shirt, as the name implies. However, because there are enough people who enjoy and want it, it gets included on the list.
Anything larger than a Full Front print is considered Oversize. The placement usually begins 2′′-3′′ down from the collar, higher than a normal-sized front.
5. Small Upper Back/Collar
This print shop began as an alternative, but has since grown in popularity to the point that it has become a norm. It reminds me of Radiohead. Anyway, it’s a wonderful spot for a logo, which is normally what’s printed here.
Keep the design simple because the average size is smaller than a Left Chest, typically 2″ to 3″ wide. The placement is about 1″ from the collar’s edge.
6. Print location Back of the Neck:
The placement of this print may simply be called “Back,” but the crucial point is that it is up across the shoulder blades.
This is usually where you’ll notice the strong words “SECURITY” or “EVENT STAFF”.
The size is normally 12″ to 14″ broad to ensure that it can be read from a distance.
Occasionally some customers require print across the bottom of the shirt. It’s an option for promotional tees most of the time. While this area does tend to draw the eye, it doesn’t have near the visibility as the Upper Back area.
7. Print location Full Back:
The Full Back is a classic and, after the Full Front, the most popular print location placement. However, it is frequently printed slightly lower and wider. The typical print size of 12″ wide by 14″ high is usually sufficient, but if necessary– and provided the garments aren’t too small– we may go up to 14.5″ wide by 16.5″ high. It’s also where you should display your most colorful and intricate design. For the Left Chest and Sleeves, keep the single-color prints simple.
8. Print location Sleeves:
Without the Sleeve, this list would be incomplete. This varies, so make sure you specify what you want if it differs from the usual. A smaller font size on the Sleeve, in particular, looks better. You can go as big as 4.5″ wide (not recommended unless your logo is really wide) or as little as 1″ wide.
Use Your Eyes:
When in doubt, trust your senses. After you’ve printed a few shirts, you’ll be able to put away all those extra tools and focus solely on the positioning of the transfers. You’ll be able to easily examine your seams, check where the actual design is on the sheet, then place the transfer paper onto the shirt to verify if it’s straight.
This will help you to work rapidly and print as many shirts as possible in a given amount of time. Transferring positions isn’t difficult as long as you know and follow the rules. You’ll become a printing pro with time, and arranging your designs will become second nature. Your design’s positioning isn’t a perfect science. You’ll be OK as long as it looks good!
This article helps you to understand print location with its placement and standard size, now you can create your own.
